The Sage MAS 90 and 200 ERP version 4.10 Service Pack 1 contains program fixes that have occurred since the initial release of version 4.10. Some of the program fixes included with Service Pack 1 have been previously released as separate program fixes. Be sure to read this document in its entirety.

For a list of program fixes and changes included in Service Pack 1, refer to the Release Notes document (410SP1SRNs.htm). This document can also be found in the MAS90\Help directory after installing Service Pack 1. The Release Notes document (410SP1SRNs.htm) contains information categorized by module detailing the program fixes and changes contained in Sage MAS 90 or 200 version 4.10 Service Pack 1.

If you have Extended Solutions or if Master Developer customizations or modifications have been made to your Sage MAS 90 or 200 software, contact your Sage Software business partner or Master Developer before installing Service Pack 1.

Installation Instructions
Read the appropriate section in this document to ensure that your installation process is smooth. A list of steps you should follow to install the Service Pack is also provided in this document.

This section contains information for installing Sage MAS 90 or 200 version 4.10 and Service Pack 1, if you are installing the software for the first time. The following is a list of what needs to be installed:

• Sage MAS 90 or 200 version 4.10
• Service Pack 1
• The version 4.10 Service Update posted after the Service Pack 1 release
• Web Engine program fixes (if you are installing e-Business Manager)

1. Read your Installation and System Administrator’s Guide in its entirety.
2. Perform the steps listed in the Pre-Installation Checklist section of Appendix A in your Installation and System Administrator’s Guide.

1. Install Sage MAS 90 or 200 version 4.10 using the instructions in your Installation and System Administrator’s Guide.
2. Download and install Service Pack 1 from Sage Software Online (www.sagesoftwareonline.com) or install Service Pack 1 by placing the Service Pack 1 CD-ROM in your CD-ROM drive and following the instructions provided on the installation screens.
3. Download and install the version 4.1 Service Update from Sage Software Online that has been posted since the release of Service Pack 1 (www.sagesoftwareonline.com).
4. If the e-Business Manager module is installed, download and install the Web Engine program fixes (IT4016-T) from Sage Software Online ( www.sagesoftwareonline.com). Be sure to follow the instructions on the e-Business Web Engine Program Fix Collection page on Sage Software Online. The Web Engine program fixes are not included as part of the Service Pack because they must be installed separately to the Web Engine. (DE 64091, PER 96267, IT4016-T)
   

1. Perform the steps listed in the Post-Installation Checklist section of Appendix A in your Installation and System Administrator’s Guide.

This section contains information for installing Sage MAS 90 or 200 version 4.10 and Service Pack 1, if you are upgrading from version 4.05 or lower. The following is a list of what needs to be installed:

• Sage MAS 90 or 200 version 4.10
• Service Pack 1
• The version 4.10 Service Update posted after the Service Pack 1 release
• Web Engine program fixes (if you have e-Business Manager installed)

1. If you have Extended Solutions or if Master Developer customizations or modifications have been made to your Sage MAS 90 or 200 software, contact your Sage Software business partner or Master Developer before installing Service Pack 1.
2. Back up your entire MAS90 directory.
3. Read your Installation and System Administrator’s Guide in its entirety.
4. Perform the steps listed in the Pre-Installation Checklist section of Appendix A in your Installation and System Administrator’s Guide.

1. Install Sage MAS 90 or 200 version 4.10 using the instructions in your Installation and System Administrator’s Guide.
   
   If you are upgrading from version 4.x to version 4.10, be sure to install Sage MAS 90 or 200 to the same location from the same machine used in previous installations of Sage MAS 90 or 200.
2. Download and install Service Pack 1 from Sage Software Online (www.sagesoftwareonline.com) or install Service Pack 1 by placing the Service Pack 1 CD-ROM in your CD-ROM drive and following the instructions provided on the installation screens.
3. Download and install the version 4.10 Service Update from Sage Software Online that has been posted since the release of Service Pack 1 (www.sagesoftwareonline.com).
4. If the e-Business Manager module is installed, download and install the Web Engine program fixes (IT4016-T) from Sage Software Online ( www.sagesoftwareonline.com). Be sure to follow the instructions on the e-Business Web Engine Program Fix Collection page on Sage Software Online. The Web Engine program fixes are not included as part of the Service Pack because they must be installed separately to the Web Engine. (DE 64091, PER 96267, IT4016-T)
5. If you are upgrading from Sage MAS 90 or 200 Level 3.x or lower, you must migrate your data first before converting your files to the current level. For more information, refer to your Installation and System Administrator’s Guide.
6. You must convert your data files to the current level (regardless of which level you are upgrading from) using the instructions in your Installation and System Administrator’s Guide.

1. Perform the steps listed in the Post-Installation Checklist section of Appendix A in your Installation and System Administrator’s Guide.
2. If this installation is on a network, run Workstation Setup on each workstation.

This section contains information for installing Sage MAS 90 or 200 Service Pack 1, if you currently have version 4.10 installed. The following is a list of what needs to be installed:

• Service Pack 1
• The version 4.10 Service Update posted after the Service Pack 1 release
• Web Engine program fixes (if you have e-Business Manager installed)

1. If you have Extended Solutions or if Master Developer customizations or modifications have been made to your Sage MAS 90 or 200 software, contact your Sage Software business partner or Master Developer before installing Service Pack 1.
2. Back up your entire MAS90 directory.
3. If the Sales Order module is installed, and you use alphanumeric invoices with fewer than seven characters and use lot or serial numbers, perform the following steps.
   (DE 61151, PER 94962, SO4036-T)
   1. Print and review the Inventory Management Detail Transaction Report or review the Sales Order Gross Profit Journal for entries processed since the installation of version 4.10. Determine if there are entries in these reports with 0.00 in the Cost field for sales that should have a cost amount other than 0.00.
   2. Enter credit memos using Sales Order Invoice Entry for invoices with improper 0.00 costs and print and update the Sales Journal.
   3. After installing version 4.10 Service Pack 1, reinvoice and update the correct costs.

1. Download and install Service Pack 1 from Sage Software Online (www.sagesoftwareonline.com).
2. Download and install the version 4.10 Service Update from Sage Software Online that has been posted since the release of Service Pack 1 (www.sagesoftwareonline.com).
3. If the e-Business Manager module is installed, download and install the Web Engine program fixes (IT4016-T) from Sage Software Online ( www.sagesoftwareonline.com). Be sure to follow the instructions on the e-Business Web Engine Program Fix Collection page on Sage Software Online. The Web Engine program fixes are not included as part of the Service Pack because they must be installed separately to the Web Engine. (DE 64091, PER 96267, IT4016-T)

Read each of the following sections thoroughly. After you install Service Pack 1, perform the following steps.

1. Back up your entire MAS90 directory.
2. If this installation is on a network, run Workstation Setup on each workstation.

1. Re-create any sales order customized program external link buttons that were previously created to launch a Crystal report. For more information, see Add a Link Control in the Help system.
   (DE 61393, PER 95118, CM4005-T)
2. In the Inventory Maintenance window, if user-defined field (UDF) drop-down lists do not have the correct values, manually update the validation list by performing the following steps:
   (DE 60597, PER 94396, CM4003-T)
   1. Select Custom Office Main menu > User-Defined Field and Table Maintenance.
   2. Select the table that contains the validation list to update.
   3. Click the Edit Fields button. The User Defined Fields window appears.
   4. Click OK, and then click OK again to update the UDFs.

3. If you added a custom tab in Sales Order Entry when the default is the expanded view (DMAINW), the customized tab must be deleted and re-customized so that Update Panels to Current Level does not remove the custom tab. (DE 62737, PER 95640, CM4011-T)

1. Run the following utilities for all companies with Sales Order files and Inventory files.
   • Run the Rebuild Sort Files utility for Inventory Management (accessed by selecting Library Master Utilities menu > Rebuild Sort Files). At the "Would you like to clear lot/serial quantities committed?" message dialog box, click Yes.
   • Run the Rebuild Sort Files utility for Sales Order (accessed by selecting Library Master Utilities menu > Rebuild Sort Files). At the "Would you like to recalculate Open Sales Order quantities in the Inventory Masterfile also?" message dialog box, click Yes.

1. Recompile all existing Visual Integrator import jobs.